Plastik Enjeksiyon Üretim Elemanı Seviye 4 MYK Mesleki Yeterlilik Belgesi

ISCO 08: 8142

ISCO 08: 8142

This qualification is for the profession of Plastic Injection Production Person (Level 4) to be carried out by trained and qualified people and to increase the quality of the works;

• To define the qualifications, knowledge, skills and competencies that candidates should have,

• To allow candidates to prove their professional competence with a valid and reliable document,

• Prepared to create references and resources for the education system, examination and certification bodies.

The learning outcomes of this qualification can be acquired in formal and non-formal learning environments such as educational institutions, as well as independently in on-the-job and free learning environments.

The person with this qualification;

• Explain occupational health and safety and environmental protection measures.
• Defines the legal and workplace rules on occupational health and safety.
• Explains reducing the risk factors related to occupational health and safety.
• Explains the emergency procedures to be applied in case of danger.
• Explains environmental protection measures.
• Explains the quality requirements for business processes and working environment.
• Explains the quality assurance techniques.
• List the errors and malfunctions that may occur during operation.
• It organizes work.
• Explains how to make and implement a business plan.
• Explains how to keep forms and records related to his work.
• Explains the pre-control processes of necessary machinery, equipment and raw materials.
• Implements OHS, Environment and Quality requirements.
• Applies the OHS rules in the works it performs.
• It applies environmental protection measures in its works.
• Applies quality requirements in the works it performs.
• Prepares the raw material for the production of plastic products.
• It ensures the transportation of raw materials, dyes and additives to the production area.
• It mixes raw materials, dyes and additives.
• Furnaces the mixture of raw materials, dyes and additives.
• It connects the mold to the machine.
• Prepares the mold for production.
• Explains how to connect the hot runner system to the mold.
• Sets the machine to manual mode.
• Places the mold in the machine.
• Fixes the mold to the machine.
• Makes the pusher settings.
• Explains how to make spade settings.
• Makes machine safety checks.
• Connects Heating/Cooling waters.
• It controls the freckles system.
• Prepares the machine for production.
• The machine controls the heater resistances.
• Vise makes precise adjustments.
• Loads raw materials, dyes and additives into the machine.
• It produces on the machine.
• Enters the values of the new product into the machine.
• The machine selects the available product values.
• Activates the machine.
• Makes periodic interim checks of the product.
• It controls the serial (semi-automatic/automatic) production process.
• Performs product packaging controls.
• Separates fired products.
• Product packaging.
• Provides parcel, case and pallet identification.
• Explains product shipment processes.
• Disables the machine.
• Turns off the raw material feed.
• It allows the machine to be brought to the manual position.
• Removes the mold.
• Carries out preventive maintenance and control of the machine.
• Performs injection machine maintenance and controls.
• It ensures the cleaning of the machine.
• Makes the organization of mold transport operations.
• It provides the necessary order according to the equipment used in the mold handling area.
• Recognizes lifting tools and materials.
• Prepares lifting tools and materials for mold handling.
• It cleans and controls the lifting equipment and mold handling area.
• Bridge crane controls.
• Performs safety and compliance checks of lifting elements.
• By controlling the crane, it controls the brake, signal, limiters, movement, communication and synchronization.
• Performs load compatibility and safety checks of lifting attachments.
• It controls the bridge crane equipment, rope and slinging tools.
• Prepares the overhead crane for lifting/transporting.
• Floor, lighting, personnel density, route, etc. of the mold handling area. checks its properties.
• Decides a safe route in the mold handling area.
• It prepares the bridge crane by using suitable attachments and lifting equipment according to the characteristics of the mold.
• Prepares the mold for lifting/transport.
• Positions the bridge crane according to the formwork.
• The pattern can be specified by feature, sling, method, angle, weight, etc. slings, paying attention to the criteria.
• Performs lifting/transporting operations with a bridge crane.
• It controls the brake, linkage, slinging by lifting the formwork to the front lifting height with the overhead crane.
• With a bridge crane, it lifts the mold to the transport height according to the feature, technological and safety rules.
• In the determined route, it moves the mold to the lowering/unloading zone at the speeds specified in the instructions.
• It keeps the mold under control in terms of feature, oscillation, synchronization, balance and safety in handling with bridge cranes.
• Monitors the mold handling area, equipment, personnel and pointer in handling operations.
• Performs unloading/unloading operations with bridge crane.
• The unloading/unloading area should be determined by safety, ground, location, etc. is kept under surveillance.
• The feature of the mold keeps its oscillation and speed under control in the unloading/lowering processes.
• Unloads/lowers the mold at the speed specified in the instructions.
• Slip, fall, etc. It places it with auxiliary equipment against the factors.

This qualification aims to document professional learning outcomes and does not contain key competences. 

Candidates who want to achieve this qualification are subjected to theoretical and performance-based exams defined in the units.

Theoretical and performance-based exams in the qualification units can be done separately for each unit or together. However, each unit is evaluated independently.

At least twenty-five (25) for A1 and B1 units in the theoretical exam; at least ten (10) for unit A2; For the A3 unit, a written exam with at least thirty (30) questions with 4 options and equal points each is applied. In the exam, candidates are given at least one minute for each question.

All skills and competencies are measured by a performance-based exam. The duration of the performance-based examination should correspond to the time in actual practice conditions. The performance-based exam is carried out in a real or realistic working environment.

Quality assurance processes are provided through certification bodies authorized in line with the relevant legislation, under the responsibility of the Vocational Qualifications Authority.

Establishment and Approval of National Qualifications:

National qualifications developed by institutions and organizations that have the power to represent their sector and profession are verified by the Sector Committees and approved by the VQA Board of Directors.

Assesment and evaluation:

It is carried out by certification bodies accredited by TÜRKAK according to ISO/EN 17024 standard and authorized by the Vocational Qualifications Authority, in accordance with VQA legislation and conditions and methods defined in national qualifications. All measurement-evaluation processes are recorded and stored on camera.

Certification:

VQA Vocational Qualification Certificate is issued to individuals who are determined to be successful by the Authorized Certification Bodies.

Self assessment:

Authorized Certification Bodies carry out self-assessment activities every year in accordance with the procedures and principles determined by VQA. Activity results are submitted to VQA with a self-evaluation report.

External Evaluation:

Based on self-evaluation reports, scheduled or unscheduled surveillance audits are carried out at least once a year by the VQA Audit Department. External evaluation reports are submitted to Authorized Certification Bodies and VQA Board of Directors. In addition, surveillance audits are carried out by TÜRKAK at least every two years within the scope of ISO/EN 17024.

Regular Review:

The external evaluation activities and results of VQA Audit Department are regularly reviewed by VQA Executive Board. In addition, TÜRKAK's external evaluation activities and results are subject to regular review by the European Accreditation Union.

Information Management Systems:

Authorization, measurement-evaluation, self-evaluation and external evaluation processes are carried out through VQA Portal.

Feedback Mechanisms:

In all processes related to qualification, stakeholder participation is ensured at the highest level and opinions, suggestions, objections and complaints are evaluated in accordance with the legislation.

Entry condition is not required.

Persons with this qualification have the opportunity to apply for the measurement-evaluation processes for the professional qualification certificates in the same field at advanced levels or in different fields, and they can also participate in employment in the field of plastic injection production.

Vocational Qualifications Authority Law

Regulation on Preparation of National Occupational Standards and National Qualifications

Vocational Qualifications Authority Examination, Measurement, Evaluation and Certification Regulation

Audit Procedures and Principles for Vocational Qualifications Authority Certification Bodies

Qualification certificate is valid for 5 years from the date of issue.